General Transfer Devices
Results: 225
'lawry' Rotary Attachment For Paraplegics
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Rotating transfer device to allow paraplegics to use the toilet then swing away from the toilet on the same seat to use the shower hose. Device made of a U shaped seat held horizontally with the help of an S shaped cantelever system fastened to the floor and using ball and taper bearings to let it rotate. This is used in conjunction with an overhead support which allows paraplegics or lower extremity amputees with upper body strength to toilet and show
3-Hole Offset Board (Model 31652)
The 3-Hole Offset Board, Model 31652, is a transfer board designed for use by people who use wheelchairs. Made of 7-ply Finnish birch plywood with a lacquer finish, the board features 3 hand holes set at an angle to assist the in gripping as the user moves across the board. DIMENSIONS (LxW): 24 x 11.5 inches. WARRANTY: The manufacturer warrants this product against defects in materials and workmanship for 90 days from the date of purchase.
32 Inch Beasy Glider Transfer System
The 32 Inch Beasy Glider Transfer System is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfers. Since there is no lifting involved, the risk of back and brachial plexus type injuries for the person being transferred are reduced and it eliminates back injuries for care givers with proper use. The Beasy Board by Beasy Trans provides users with a safe, comfortable and dignified way to transfer from bed to wheelchair, from wheelchair to commode o
Ableware 704021048 Gait Belt-Striped-48"
Gait Belt-Striped 48 inches is designed for to help health care providers and caregivers to move patients from one surface to another.
Ableware 704021054 Gait Belt-Striped-54"
Gait Belt-Striped-54 inches is designed to assist health care professionals and caregivers with transferring patients from one surface to another.
Ableware 704022000 Slip-On Gait Belt Handle With 2 Grips
The Ableware Slip-On Gait Belt Handle slides onto any gait belt 2 inches (5.08 cm) wide or less and provides caregivers with two strong, easy to grab vertical handles. Making use of both horizontal and vertical holding positions results in safer and easier transfers. Made of high strength webbing; it won't rip or tear. Belt not included.
Ableware 704040000 X-Fer Rail Portable Transfer Rail
X-Fer Rail Portable Transfer Rail is designed for people who use a transfer board but do not travel with them due to their bulkiness and weight. The portable transfer board offers all of the functionality of a traditional transfer board but folds to a compact 16.25 inches (41.3 cm) when not in use. It folds and unfolds enabling safe transfers to and from a wheelchair, and fits in a backpack, wheelchair bag, carry-on or briefcase. Its portability promotes use outside of the home helping to redu
Ableware 704200000 Leg Assist Mobility Device
Designed to make it easier for caregivers to reposition and transfer people recovering from total hip or knee surgery when it is necessary for the legs to be kept stable and moved in unison. Legs and hips are also positioned in-line to eliminate the risk of further injury. Made of soft, comfortable fabric with a built-up grip that can be adjusted to accommodate the user's preference. Machine washable.
Ableware Reversible Toilet Transfer Seat (Rtts)
The Ableware Reversible Toilet Transfer Seat (RTTS) is a toilet transfer aids designed for use by individuals with mobility disabilities. The unit can be used with the armrests up to assist those who have difficulty rising from the toilet, but do not require as much assistance as provided by an elevated toilet seat or grab bars. When used with the armrests turned toward the floor, this device becomes an extra-wide extended platform to assist in wheelchair transfers. This seat bolts to most stan
Adapted Grab Bar For An Armchair.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Grab bar to assist person in standing up from upholstered armchair. Two metal strips attach to side frame of armchair. Two steel pipes form the bar. One attaches vertically to the metal strips. The second, horizontal bar attaches to the vertical one. A specially fabricated joint allows the horizontal bar to pivot or to lock in position, providing a stable hand grip. Measurements determine the optimum distance from chair for vertical bar and the optimum
Adaptive Device For Polecat Transfer.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adaptation of a Polecat to aid in wheelchair transfers for persons with some arm and leg muscle strength. Describes a turntable attachment made of two blocks of wood about 10 by 5 by 2 fastened together with a hinge on one side and a gate latch on the other; a semicircular platform with an 8 inch radius nailed to each block; and a hole drilled through platform and block to allow the device to be fastened around a Polecat. The patient places both feet o
adapts
ADAPTS is a portable transfer sling designed for people with mobility disabilities and is intended for use in emergency situations on airplanes, or in everyday situations in a user’s home. There are six handles for up to six carriers. ADAPTS can be used to transfer an individual from the ground to a chair and a bed to a chair. It can also be used down stairs and through narrow tight space and can be folded into its own tote. ADAPTS can be used in the following configurations:
Advantage-Rail System
The Advantage-Rail System is a standing transfer aid designed for use by individuals with mobility and balance disabilities. Intended for use beside the bed, toilet, or bathtub, the unit consists of a height-adjustable support rail with a padded horizontal handle and a floor plate. The rail fits in the low-profile floor plate with a push-down-and-turn motion, allowing the rail to be used in multiple locations. With a gentle lift, the handle pivots with the user to assist in taking small steps fo
AliMed AliRail Bed Rail
The AliMed AliRail Bed Rail is designed for individuals with mobility and balance disabilities who need assistance getting in and out of the bed. Its M-shaped design allows for two-handed gripping. Provides protection without enclosing the user completely. No-slip, ergonomically shaped foam-covered grip makes holding the bed rail handle easier. Double cross brace for maximum support. Strong nylon straps wrap around box springs to provide more counter weight and extra-secure installation. Three-p
Alvema Pixi Stroller
The Alvema Pixi Stroller is a sturdy transfer device specifically designed for children with disabilities who lead active lifestyle. Pixi is outfitted with features such as a folding footrest, an adjustable-angle push-bar as well as a footbrake so both the user and operator of the stroller have complete control and comfort.
Anti-Slip Transfer Board With No Hand Holes
The Anti-Slip Transfer Board with No Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEIGHT: 2.5 p
Anti-Slip Transfer Board With Two Horizontal Hand Holes
The Anti-Slip Transfer Board with Two Horizontal Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24, or 29 x 8 inches.
Anti-Slip Transfer Board With Two Vertical Hand Holes
The Anti-Slip Transfer Board with Two Vertical Hand Holes is a transfer board designed for individuals with balance, lower extremity or mobility disabilities. It to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. This sliding board can also provide assistance to enable a therapist or caregiver to perform of a transfer. The two-tone board is available in three lengths. DIMENSIONS (LxW): 21, 24 or 29 x 8 inches. WEI
AquaTrek Transfer Platform
The AquaTrek is a pool platform designed to help individuals with mobility disabilities to transfer from wheelchairs into the water in a pool. Portable. Lightweight. Wide bench style seat. Can be used as an alternative to hydraulic lifts.
Armrest To Assist With Standing
CUSTOM ADAPTATION PURPOSE: To enable an individual with arthritis to rise to a standing position from a seat without armrests. This device was designed to be portable for use with a variety of armless chairs and church pews. The frame with a U-shaped base was made of 20 millimeter steel tubing and steel tubing armrests were attached to the base. The front arms or prongs of the base have wide flat strips that provide a stable surface for the user as she pushes on the armrests to stand. A seat an
Assist-A-Tray
The Assist-A-Tray is a transfer aid and a swiveling tray for an armchair or sofa designed for use by individuals with balance or mobility disabilities. The unit features a sturdy, ergonomically designed handle for assistance when getting in or out of a sitting position and a multi-use swivel tray with cup holder and utensil compartment. The unit can be used on the right or left side of a chair or couch and the base slides underneath the furniture. The base has four feet with rubber pads to ensur
Assista-Rail
The Assista-Rail is a transfer aid for beds designed for use by individuals with balance or mobility disabilities. This inverted-U shaped rail slides between mattress and box spring and the required, included safety strap with side-release buckle and anti-slide grips prevents the rail from shifting during use. Made of heavy-gauge steel, the rail is equipped with a non-latex foam grip. DIMENSIONS: The unit extends 24 inches under the mattress and up from the mattress 16 inches. The rail extends a
Aust.rail.ia
---- PROTOTYPE --------- PURPOSE: To assist individuals with balance or mobility disabilities and generalized weakness stand and negotiate environmental barriers with a portable handrail. Aust.rail.ia is a portable all-purpose rail that can be used indoors or outdoors as a handrail, vehicle barrier, general purpose barrier or a “space-restoring” storage or shelving utility area. It can also be used as a sitting/standing aid. This portable rail requires mounting at one end, eliminating the ne
Banana Curved Transfer Board
The Banana Curved Transfer Board is a hard wearing polyethylene transfer board for seated independent or assisted transfers. The transfer board is shaped to facilitate positioning and features anti-slip pads on the underside for safer location and a convenient carrying handle. Can be cleaned with soapy water/alcohol/disinfectant and a non-abrasive cloth. It is unbreakable and chip resistant.
Beasy II Transfer System
The Beasy II Transfer System is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfer. The transfer system is desinged for use in smaller areas, especially during bathroom transfers, or for boosting patients in bed. It may also be used for independent transfers with professional approval.
Beasyglyder 32
The BeasyGlyder is a transfer board system designed to assist individuals in transferring between a wheelchair and bed, shower bench, commode, car, chair, etc or between a stretcher and a bed. This device is crescent-shaped to fit around wheelchair arms and wheels. It features an elongated S-shaped groove in the center to serve as a track for a round seat that rotates up to 360 degrees and slides from one end of the track to the other. Because the seat slides with the user, the shear stress and
Beasytrans Easy Transfer System (Ets) & Beasy Ii Easy Transfer System (Ets)
The BeasyTrans ETS and Beasy II ETS are transfer board systems designed to assist individuals with transfer between a wheelchair and a bed, shower bench, commode, car, chair, etc. or a stretcher and a bed. These devices differ from other transfer devices in that they have sliding seats that move from one end of a central elongated S-shaped track to the other. Because the seats slide with the user, the shear stress and friction associated with moving is borne by the system, not the users' skin.
Bed Caddie
The Bed Caddie is a rope ladder designed to assist individuals with mobility disabilities or decreased back strength in pulling themselves to a sitting position in bed. This three-tiered nylon ladder has cushion grip handles and the ergonomic buckle design enables the unit to be attached to most wood or metal bed frames. DIMENSIONS: Grip length is 36 inches; handle grip is 5 inches. Strap length is adjustable up to 45 inches. CAPACITY: 300 pounds. WEIGHT: 2 pounds.
Bed Cane
The Bed Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a large, crook-shaped handle with a cushioned grip and a powdercoated shaft affixed to a wooden base. The base fits between the mattress and box springs to provide stability for the handle which can be used for assistance while entering and exiting the bed, as well as to maintain balance while rising to a standing position or transferring to a wheelchair. The unit can be installed o
Birillo Gait Trainer Walker Size 1
The Birillo Size 1 is a gait trainer / walker specifically designed to give a child with special needs the ability to move freely and safely around the home, school, daycare, and therapy environments.
Body Up Evolution
The Body UP Evolution is a transport chair, caster commode, shower chair and transfer lift sling designed for use by people with balance, lower extremity or mobility disabilities, or spinal cord injury. FRAME (HxLxW): 44 x 35 x 18 inches. This chair has a stainless steel frame with a hinged back so that a person can be loaded from the rear of the frame. The frame separates into two pieces for transport or storage. SEAT: Sling seat that can be raised or lowered. To facilitate loading, the seat ca
Bottoms Up Bar
The Bottoms Up Bar is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person in a wheelchair to transfer to a seated position on the ground or floor and from the floor or ground back into the wheelchair. The Bottoms Up Bar attaches to a wheelchair's frame with two collar clamps that are fastened to the front of the frame. The width of the Bottoms Up Bar is adjustable to accommodate multiple wheelcha
Bottoms Up Bar Adjustable Base Unit
The Bottoms Up Bar Adjustable Base Unit is a transfer aid designed for people with lower extremity and mobility disabilities or spinal cord injury and lower extremity amputees. It allows a person to use the Bottoms Up Bar (see separate record) transfer from a parked wheelchair or a chair, sofa or other sitting furniture to a seated position on the ground or floor and from the floor or ground back into the chair. The four legs of the Bottoms Up Bar are placed into holes in the Base Unit's frame
Buscot Babevac Cot
Buscot Babevac Cot is designed for use in the hospital environment for easy and safe evacuation of premature and new born babies in the event of fire or emergency. The Buscot Babevac Cot will carry up to three babies, depending on size and condition. Secure storage for small oxygen cylinder on the underside of the cot to allow manual ventilation of baby if required. (Cylinder not included). Adjustable shoulder straps enable the cot to be carried by one or two carriers. Flexible strong constructi
Canadian Padded Transfer Board
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Padded transfer board with a plinth which fits into the forward arm rest socket of a standard wheelchair. Transfer board made of 15 by 6 1/2 inch plywood, a base plate of iron or steel, an iron water pipe, a sheet (10 by 6 inches) of firm leather or plastic, foam padding and a slippery fabric cover. The board is used in place of either arm of the wheelchair. Includes instructions and diagrams. SKILLS REQUIRED: Woodworking. Upholstering. AUTHOR: Wightwi
Car Ease Slide (CMT978)
The Car Ease Slide is a fabric slide designed for aging individuals, people with mobility, lower extremity, or other physical disabilities. The Care Ease Slide allows a person to position themselves on a car seat. The slick inner surface allows the user to get in or out of a car seat with minimal effort. The Car Ease Slide is a low friction fabric designed to allow users to slide and rotate on the car seat. The device measures 18 inches wide and 22 inches long.
Car Seat Slide Pad (Item # 504P)
The Car Seat Slide Pad is designed for aging individuals, people with mobility disabilities, lower extremity disabilities, and people with general weakness. The Car Seat Slide Pad consists of a Top Pad and Bottom Pad. The person can slide their bottom back into the middle of the seat and then turn themselves around. If they need assistance, a caregiver can push them back into the seat and lift their feet into the car. If necessary, use the webbing positioning handles to turn the person to face t
Car Slide (Model 70406)
The Car Slide, model 70406, is a transfer aid designed for persons who have difficulty getting positioned on a car seat, chairs, or beds. The device consists of a waterproof denim top and a slippery vinyl bottom. Large hand loops are made of 1-inch webbing and located on each side of the rectangular mat. DIMENSIONS: 30 x 35.5 inches. WEIGHT: 1 pound 9 ounces.
Car Slide.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A fabric slide to be used to help position a person on a car seat. Slide made with about a yard of slippery material (nylon) sewn to a yard of nonslippery material (denim) with strong fabric or webbing sewn in three long ovals to make handles. The nylon side goes against the car seat for ease of sliding. Includes diagram and photograph. SKILLS REQUIRED: Sewing. AUTHOR: Kernaleguen, A TITLE: Clothing Designs for the Handicapped REF: Edmonton, Alberta, C
Care-Give-R-Lift Bed Sled
The Care-Give-R-Lift Bed Sled is a turning aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Designed for repositioning a person in a bed or recliner the device is made of cotton canvas with heavy nylon webbing handles across the width at two locations. A removable bed pad or terry cloth pad can also be placed on the device for comfort. The unit is hand- or machine-washable in warm water and should be air dried. DIMENSIONS(LxW): 40 x 30 in
Care-Give-R-Lift Skid Seat ( Perforated Suede Vinly)
The Care-Give-R-Lift Skid Seat (Perforated Suede Vinyl) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is designed for use with a gel cushion and is made of perforated suede vinyl backed with non-slip fabric. Perforations allow air circulation. The suede surface is soft to the to
Care-Give-R-Lift Skid Seat (Canvas) (Models A & B)
The Care-Give-R-Lift Skid Seat (Canvas) is a transfer aid designed for use with individuals with severe physical or mobility disabilities or spinal cord injury. Used for repositioning an individual into a seated position in a wheelchair or other chair with little or no strain on the caregiver, the device is made of cotton canvas. A snap-close tether stap holds the seat on the chair while the individual is being seated. The device can be hand washed and air dried. Model A has full loop handles s
CareGuard Standard Sling without Commode Opening
The CareGuard Standard Sling without Commode Opening is a transfer sling designed for use by individuals with mobility and balance disabilities. The sling commode opening can be used on heavy or light patients. It can be used for weighing, transferring, or to simply reposition the patient. Polyester mesh fabric supports the patient from shoulders to the knees.
Carex Ultra Grip Pivot Suction Grab Bar
The Carex Ultra Grip Pivot Suction Grab Bar is designed to assist individuals in the tub, shower, and bathroom to prevent slips and falls, and offer support. These grab bars are available in straight lengths and 22 different custom designs. The unique pivoting center design allows for installation in whatever position it is needed and the handy visual indicators on the suction cups ensure you're grabbing onto a solid handle.
Handy and easy to use, this suction cup grab bar delivers ideal balance
Cindy Lift
The Cindy Lift is a seat transfer lift aid designed to make lifts more manageable for caregivers and the individual being assisted and to broaden accessible areas for its user. The lightweight aluminium frame allows for quick transfers in a three-step process. This unit adjusts to the user's body and reduces the weight of its occupant for the lifter. The narrow profile fits through doors, halls, and restroom stalls. With this device, the user is able to wear street clothes instead of gowns, and
Classic Brands Reversible Cool Gel and Memory Foam Pillow
The Classic Brands Reversible Cool Gel and Memory Foam Pillow is designed for use by individuals with back or neck pain. The memory foam surrounds a pad of cool gel material. This cool gel memory foam pillow responds to temperature and pressure to create the ideal support for the head, neck, and shoulders. This pillow is naturally hypo-allergenic and features a removable zip-off cover that is machine washable.
Columbia Medical Therapedic Chlid Car Seat
The Columbia Medical Special Needs Car Seat is available for children who have outgrown regular car seats. It will fit children from 20-102 pounds and up to 60 inches tall. The seat is designed for those who cannot sit upright unassisted.
Comfort Carrier Transfer Sling
The Comfort Carrier Transfer Sling is a manual transfer sling designed for use by wheelchair users with spinal cord injury, neurological disabilities, stroke, cerebral palsy, or brain injury. This sling enables wheelchair users to transfer with assistance from two helpers. The sling is slipped around the seated user, then is crisscrossed under the thighs and its buckle is fastened. Two assistants (in front and back or on each side) lift and transfer. The foldable sling is lightweight and machine
Contemporary Styled Transfer Bench (Model 77356)
The Contemporary Styled Transfer Bench, model 77356, is a bathtub transfer bench designed for use by individuals with balance, lower extremity, or mobility disabilities. This bench has a contoured seat back with a handle for removal, sturdy legs with non-slip rubber feet, and a split seat with built-in drainage. The split seat allows the user to tuck in the shower curtain to avoid water leaking on the floor. The bench is reversible for shower use. OPTIONS: Shower Holder Attachment (model 77010);
Couch Cane
The Couch Cane is a transfer aid designed for use by individuals with mobility disabilities. This device consists of a crook-shaped handle with a cushioned grip on an adjustable powdercoated shaft resembling a standard cane affixed to a base with non-skid pads. This device can be used at either end of a couch or on either side of a large chair or recliner. The base slides under the furniture for stability and the handle can be used to assist in sitting down or in rising to a standing position.
Curved Transfer Board
The Curved Transfer Board is a transfer board designed for use by individuals who use wheelchairs. Made of solid, reinforced, waterproof plastic that resists chipping, shattering, and splintering, this board has tapered ends and a smooth surface for easy sliding. The curved design accommodates a variety of transfer situations, and slip-resistant pads on the underside at each end increase stability. DIMENSIONS: 27 5/8 inches long and 14 5/8 inches wide tapering to 10 1/8 inches wide in the middle
Deluxe Transfer Board (Models Nc94205 & Nc94205-B)
The Deluxe Transfer Board, models NC94205 and NC94205-B, is designed to assist people who use wheelchairs. The Deluxe Transfer Board (NC94205) is made from 0.5-inch thick birch and tapers at both ends for transfers. The Bariatric Transfer Board (NC94205-B) features two hand holes and a heavy duty 9 ply birch wood base with 3 additonal piles form-laminate on top. CAPACITY: 450 pounds for NC94205 and 650 pounds for NC94205-B. DIMENSIONS (WxL): 8 x 24 inches for NC94205 and 10 x 32 inches for NC942
Deluxe Wood Transfer Board
The Deluxe Wood Transfer Board is designed for use in transfers to and from wheelchairs. This solid hardwood board has tapered ends and is urethane coated, sealed, and polished for smoothness. The board has a cut-out handle for gripping and carrying. DIMENSIONS (LxW): 30 x 8 inches. CAPACITY: 250 pounds.
DIY Transfer Bath Bench
DIY Transfer Bath Bench is designed for use by individuals with mobility disabilities to assist with moving from one surface to another.
Dr. Joseph's Universal Adl Accessories
Dr. Joseph's Universal ADL Accessories are a footbrush, inspection mirror, dressing hook, leg lifter, and shoe horn designed for use by individuals with diabetes and mobility disabilities or arthritis. Designed to provide hygiene, inspection, and care of the lower leg, ankle, and foot, the components are available individually to enable the user to select only those items that are needed. Available components include the universal long handle only, the universal handle with footbrush, a packag
Drive Medical Bariatric Heavy Duty Canvas Sling
The Drive Medical Bariatric Heavy Duty Canvas Sling is a manual transfer sling designed for use by individuals with mobility and balance disabilities. This heavy-duty canvas offers heavy duty support to floor lifts. The solid design fits well with any décor and the canvas material provides strength. Ideal for use with electric or manual lifts, these slings can also be used just be four individuals if necessary.
Drive Medical Full Body Patient Lift Sling
The Full Body Patient Lift Sling is designed for use by individuals with mobility and balance disabilities. This sling is adaptable to any situation and works with any floor lift and has a commode cutout and four sling points. The mesh-design is made of polyester product and does not require an optional chain or strap and can withstand a weight capacity of 600 pounds. This sling includes 4 or 6 cradle points.
Drive Medical Seat / Back Patient Lift Sling
The Drive Medical Seat / Back Patient Lift Sling is a transfer sling designed for use by individuals with mobility and balance disabilities. This basic sling uses chain links to attach to the Patient Lift. This provides a large range of positions and angles that the sling can be adjusted to. Additionally, the sling is designed for transporting someone in a sitting position and is suited for someone with limited mobility.
E-Zee Gait Belt (Models 6524V & 6528V)
The E-Zee Gait Belt, models 6524V and 6528V, is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers for people with balance, lower extremity, mobility or walking disabilities. This machine-washable cotton belt has Velcro closure for easy application. DIMENSIONS (LxW): 62 x 2 inches. The belt fits 24- to 52-inch waists. COLOR: Model 6524V is white and model 6528V is navy.
Easy Mover Slide
Transfer aid made of unbreakable material and sealed steel bearings on a track. Eliminates need of physical lifting by attendant. Moves 650 pounds up or down a 20 degree incline. Available in 8 by 8 inch, and 8 by 12 inch seats. Overall size 8 inches by 30 inches.
Easybelt (Models 6012, 6013, 6014, & 6015)
EasyBelt, models 6012, 6013, 6014, and 6015, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt has strong vertical and horizontal handles for gripping support and can be used for sitting transfers or for supporting an individual when standing or walking. Made of moisture- and soiling-resistant nylon. SIZES: Extra small, with 5 handles (6012), small, with 7 handles (6013), medium, with 9 handles (6014), or large, with 11 handles (601
Easyglide (Models 5020, 5050, 5060, & 5070)
The Easyglide, models 5020, 5050, 5060, and 5070, is a transfer board designed for use by individuals with mobility disabilities. Designed to facilitate seated transfers between two surfaces, this hard, slick polypropylene board is also flexible to allow it to be bent over the wheel of a wheelchair. Anti-slip tape on the underside of the board prevents the board from sliding during use. This board also features a hand slot at each end. DIMENSIONS (LxWxH): Model 5020 is 24 x 13 x .2 inches. Model
Easyslide (Model 1030)
The Easyslide, model 1030, is a transfer aid designed to assist caregivers in transferring individuals with mobility disabilities to X-ray, treatment, or operating tables; stretchers; or shower stretchers or to move the individual in bed. This tubular device consists of a protective woven nylon cover coated on one side with polyurethane and a quilted mat with a woven cotton outer shell; a woven, ultra-low friction nylon liner; and flame-retardant trevira padding. To use the slide, the individual
Easyslide (Model 1230)
The Easyslide, model 1230, is a transfer aid designed to assist caregivers in transferring individuals with mobility or severe physical disabilities. It can be used for transfers between beds and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfort in transferring, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polye
Easyslide (Model 1480)
The Easyslide, model 1480, is a transfer aid designed for use in moving individuals with mobility disabilities. It can be used to aid in transferring between beds and x-ray or operating tables, shower trolleys, or cots. This transfer aid has a soft, padded outer surface for comfortable transfers, with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved with minimal exertion. OPTIONS: Disposable protective polyethene covers. DIM
Easyslide (Models 2010, 2015, 2020, & 2030)
The Easyslide, models 2010, 2015, 2020, and 2030, is a transfer aid designed to assist caregivers in moving or transferring individuals with mobility disabilities. It can be used in transferring between bed and x-ray or operating tables, shower trolleys, and cots. It has a soft, padded outer surface for comfortable transfers. Models 2010 and 2015 are made of polyester with ultra low friction (ULF) material on the inner surface of the sliding mat to reduce friction so individuals can be moved wit
Econoglide Transfer Boards
The Econoglide Series are Transfer boards designed to assist people with physcial disabilities in transferring from one surface to another. The boards are fabricated high density stress-relieved linear plastic. The moisture-proof boards are striate-sanded on one side and buff-sanded on the other. Models include the plain board, board with telescope and hand hole, board with hand hole, board with 2 hand holes, board with hand hole and notches, and board with 2 hand holes and notches. CAPACITY: 40
Econoslide Series Transfer Boards
Econoslide Series Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are made from defect-free 7-ply birch plywood and have rounded corners, ends, and edges. The surface is machine-sanded and finished with clear lacquer. Models include the plain board, board with hand hole and telescope, board with hand hole, board with hand hole and notches, board with 2 hand holes, and board with 2 hand holes and notches. CAPACITY: 400 pounds. DIMENSIONS: All model
Ergonomic Walking Belt (Model 6534)
The Ergonomic Walking Belt, model 6534, is a gait belt designed for use with individuals with mobility and balance disabilities. This wide, machine-washable cotton belt features buckle closures, plastic handles on either side, and a cotton handle in the back to provide secure grips for therapists and care givers. SIZES: Small (fits waists 26 to 34 inches), medium (fits waists 33 to 38 inches), large (fits waists 36 to 46 inches), and extra large (fits waists 44 to 52 inches).
Ergostand
The Ergostand is a standing transfer aid designed to be used by individuals with balance, lower extremity, mobility, and severe physical disabilities. The Ergostand can be used to dress, clean and transfer individuals in need of additional support. The individual is supported by a band sling with a Velcro waist enclosure reinforced with two belts. A back support, a padded knee support and an anti-slip foot base ensure safety. Control of start and stop, motorized base, and 2-speed vertical moveme
Essential Hardwood Transfer Board (Model P2300)
The Essential Hardwood Transfer Board, model P2300, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This hardwood board is sealed and highly polished for ease in sliding and features a tapered end and one hand cut-out. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 250 pounds.
Essential Plastic Transfer Board (Model P2301)
The Essential Plastic Transfer Board, model P2301, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. This high-impact plastic board has a smooth surface for ease in sliding and features a tapered end. DIMENSIONS (WxL): 8 x 27.5 inches. CAPACITY: 250 pounds.
Extra Wide Perineal Cutout Tub Transfer Bench (Models Cq-1730Xdl & Cq-1730Xdr)
The Extra Wide Perineal Cutout Tub Transfer Bench is a bariatric bathtub transfer bench designed for use by individuals with mobility disabilities. This extra-wide bench has a perineal opening for personal hygiene and fits standard bathtubs at least 22 inches wide at the center. This bench features vinyl grips on the tubing to prevent marring the tub; a removable short back that discourages reclining; and, "Tube in a Tube" construction for added strength. The bench is available in a wall to left
Ez Pull Sheet
The EZ Pull Sheet is a transfer aid designed for use in positioning and turning individuals with mobility disabilities in bed. This transfer aid is constructed of a layer of soft cotton/poly material on top, and a layer of nylon on the bottom. The tight weave of the top layer is such that the sheet has intrinsic liquid barrier characteristics so it offers incontinence protection. The EZ Pull Sheet has double-stitched seams and five integrated handles. It can be machine washed and dried and is w
Firefly Upsee
The Firefly Upsee is an upright walking device for children with neuromuscular disorders or motor impairments, such as cerebral palsy. The three part kit, allows a child to be attached to their parent, while in a stable, vertical position. The child's feet are also positioned parallel to his or her parent, allowing for smooth movement while walking. The Upsee is suggested for children ages 1 to 8 years of age.
Flexibelt (Models 6023, 6024, 6025, & 6026)
Flexibelt, models 6023, 6024, 6025, and 6026, is a transfer aid and gait belt designed for use with individuals with mobility or walking disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. The belt has a polyester surface for comfort against the body, with strong vertical and horizontal handles for gripping support. SIZES: Small with 7 handles (6023), medium with 9 handles (6024), large with 11 handles (6025), or extra large with 13 hand
Flexigrip (Model 6090)
FlexiGrip, model 6090, is a bed transfer aid designed for use by individuals with mobility disabilities. This eight-handle transfer aid can be used when getting out of bed or when making transfers. It is made from soft nylon that resists soiling, and can be fitted at the foot end of the bed using a loop. DIMENSIONS (LxW): 175 x 9 centimeters.
Fleximove (Models 3012, 3020, & 3030)
The Fleximove, models 3012, 3020, and 3030, is a transfer aid designed for turning, positioning, or transferring an individual with mobility disabilities. This unit can be used for moving patients further up in bed or to and from a wheelchair. 3012 has an inner surface made of moisture-resistant nylon for environments with special hygiene requirements, while 3020 and 3030 have a softer, more comfortable velvet surface. DIMENSIONS (LxW): 60 x 20 centimeters (3012, 3030) or 50 x 20 centimeters (30
Fleximove (Models 4011, 4012, & 4016)
The Fleximove, models 4011, 4012, and 4016, is a transfer aid designed for turning, positioning or transferring an individual with mobility disabilities. A padded board with handles and an inner surface of polyester, the unit can be used for moving patients further up in bed, turning over, sideways transfers, or when a patient must be lifted from the floor after falling. Models 4011 and 4012 consist of four handles; model 4016 consists of six handles. DIMENSIONS (LxW): 102 x 43 centimeters (4011
Foot Wranglers
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual to uses a wheelchair to lift his/her feet onto the footplates. Create a large loop at the end of a length of parachute cord (available at hardware stores). Place the loop around the foot and use the remaining cord to pull the foot onto the footplate. The cord is lightweight and can be conveniently carried along. MATERIALS: Parachute cord. AUTHOR: Labbe, A. TITLE: Quest Extra: Doing It Yourself. JOURNAL: Quest. WEB SITE: http://www.mda.or
FREEDOM Grip Plus
The FREEDOM Grip® Plus is a transfer device designed for use by stroke and Parkinson’s patients, as well as those with severe back pain, arthritis, or similar injuries, to meet unique height adjustable needs and to help patients transfer from bed to wheelchair or commode, or to aid in getting in and out of bed. It helps those who want to get in and out of bed on their own to maintain their independence. Designed to accommodate thicker mattresses. The top of the handle is covered with skin friend
Freedom Safety Booster (Models 75579 & 75582)
The Freedom Safety Booster is a transfer aid designed to aid in positioniing in bed individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pull the device toward the headboard to move the individual up in the bed. The unit is machine washable and disinfectant safe. It shou
Freedom Turner (Model 75638)
The Freedom Turner is a transfer aid designed to aid in turning or transferring individuals with lower extremity or severe physical disabilities or spinal cord injury. This device is a flat tube of fabric with a slippery interior surface. The person to be turned is positioned on top of the tuble. The caregivers grasp the reinforced edges of the top layer and pulls the device toward themselves. Once the Turner is in place, it can also be used by one caregiver to turn a side-lying individual on to
Friendly Bed System (Model Eb)
The Friendly Bed System, model EB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits king, queen or double conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboa
Friendly Bed System (Model Fb)
The Friendly Bed System, model FB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits queen, double, and twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footb
Friendly Bed System (Model Tb)
The Friendly Bed System, model TB, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin conventional beds. The frame has two end pieces that are placed beyond a bed’s headboard and footboard (or end if the bed does not have a footboard). The ends ar
Friendly Bed System (Model Tb/hw)
The Friendly Bed System, model TB/HW, is a bed mobility, transfer and positioning aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. The system has a steel framework that fits twin beds with a Hollywood style frame. The system’s frame has two end pieces that are placed beyond the head and foot of the bed. The ends are connected by two pa
Gait Training Belt
The Gait Training Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This cushioned belt features two nylon web handles for secure grip and hook-and loop closure. SIZES: Small (fits waists 30 to 34 inches), medium (fits waists 34 to 40 inches), or large (fits waists 36 to 46 inches). DIMENSIONS: The belt is three inches wide and the hook material for closure is 14 inches long.
Gimme A Lift
Gimme a Lift is a transfer aid designed for use by individuals with balance or lower extremity disabilities who are able to bear weight or are ambulatory. Designed for use in home, work, or institutional health care settings, this device can be used unattended by the individual or with the assistance of a care giver. The unit lifts and lowers individuals to stand up, sit down, sit up, or lie down. It supports walking and transfers to walkers, chairs, and wheelchairs. In the assisted mode, a nurs
Grip-N-Assist Professional
Grip-n-Assist Professional is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It designed for heavy use in domestic, institutional and professional settings. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable str
Grip-N-Assist Standard
Grip-n-Assist Standard is a transfer aid designed for use with individuals with mobility, walking or standing disabilities. The belt is used for sitting transfers or for supporting an individual when standing or walking. It is intended for light and moderate domestic use. The belt can be worn by the person with a disability and held by the caregiver or worn the caregiver with the person with a disability holding the handle. The belt is secured by an adjustable strap that fastens with a Velcro st
Guardian - Padded Transfer Bench/Shower Chair
The Guardian - Padded Transfer Bench/Shower Chair is a medical device designed for those with limited mobility to use while bathing. Provides comfort and extra security with suction cup feet for a secure grip to the tub floor. Commode seat is height adjustable so it accommodates most tubs. Features a backrest that adjusts for both left and right facing tubs.
Handi-Lift Walk Belt (Model 516Xm, 516M, 517M, 518M & 518Xm
The Handi-Lift Walk Belt, models 516XM, 516M, 517M, 518M, and 518XM, is a standing transfer aid designed for use to aid transfers by individuals with balance, lower extremity, mobility, or walking disabilities. The belt is secured with a double Velcro closure, and its Miracle Grip inner lining grips the patient's clothing. The belt has four large padded vertical handles. It is normally used by two caregivers working together, but if necessary, one caregiver with training can use the belt with a
Handler, The
The Handler is a transfer aid designed for use with individuals with mobility disabilities during transfers to the commode, bed, or wheelchair.. The device is a strong polyurethane plastic sling that conforms to the individual's body and features two sets of handhold holes for appropriate hand placement during lifting. DIMENSIONS: 21.5 x 8.5 inches.
Handy Handle
The Handy Handle is a standing transfer aid designed for provides better leverage and grip for those needing assistance while standing from a toilet, car, couch or bed. Comfort Grip. Portable.
Handybar
The HandyBar is a car transfer aid designed for use by individuals with arthritis, balance, or mobility disabilities. Made of forged steel with an ergonomic foam-cushioned handle, this device fits in the U-shaped door striker of most cars to create a handle for extra leverege to aide in getting out of a car. The device can also be used to break automobile windows or cut seat belts in the event of an emergency. CAPACITY: 350 pounds.
HealthCraft Advantage Pole
The HealthCraft Advantage Pole™ is a product designed for patients with mobility disabilities to use in their home or anywhere they need extra support.
HealthCraft SuperBar Add On Kit
The HealthCraft SuperBar Add On Kit™ is an accessory to the HealthCraft Standard SuperPole™ designed to create exceptional vertical and horizontal support. Water Resistant. The SuperBar has eight locking positions, one every 45 degrees, for superior centralized support as the user moves. Lift the rail and move the bar to automatically lock it into the next position. The SuperBar, when strategically placed in the user's home, offers support that can be placed where the user needs it, moving with
HealthCraft SuperTrapeze Add-On Kit
The HealthCraft SuperTrapeze™ Add-On Kit is an accessory to the HealthCraft Standard SuperPole™ designed for use by individuals with balance, walking, or mobility disabilities to get in and out of bed easier. For commercial and residential use. By redesigning the triangular shape to include two points of leverage, the user can maximize on strength to climb more easily into a seated position. The new, ergonomic design also reduces wrist strain. Once in a seated position, the SuperPole™ also provi
Hi D Transfer Board (Model Bk6111)
The Hi D Transfer Board, model BK611, is a transfer board designed for use by individuals with mobility disabilities. Made of polyethylene plastic, this transfer board features a smooth easy slide surface with round corners and centered hand slot. DIMENSIONS (LxWxD): 26 x 10 x .5 inches. WEIGHT: 6 pounds.
In-Bed Patient Positioning System (Model 55036)
The In-Bed Patient Positioning System is a transfer aid designed to aid in positioning and turning individuals who spend extended periods in bed. The system includes a positioning pad with handles and two wedges that support the individual in the desired position. The pad features three layers: a poly-cotton top layer to wick away urine and other moisture, an absorbent foam center layer, and a liquid-proof vinyl barrier to protect the bed. The vinyl-covered bolsters support the side-lying indivi
Inclined Board
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adaptation for individuals with mobility disabilities to use when they fall and have no way getting back up to the raised position. The Inclined Board constructed from a ¾ inch piece of plywood, 22 inches tall by 48 inches long. The board has notches on both sides for the individual to hold and grab on to. At the top of the Inclined Board there are two holes by which a piece of rope can be inserted and knotted securely in place.
Invacare Knee Walker 65960
The Invacare Knee Walker offers a cushioned substitution for crutches.
This walker features an easy-to-operate ergonomic hand brake, soft knee pad, and easy folding for storage or transport. It provides maneuverability with the 5 inch front swivel wheels and height adjustability for a custom fit. A basket is also standard for this model.
Ix Transfer System
---- PROTOTYPE --------- PURPOSE: To design a prototype of a short distance transfer system for use by individuals with lower extremity and mobility disabilities, people with spinal cord injury and others who use wheelchairs, aided by a caregiver. The IX Transfer System is a transfer aid and transport wheelchair intended for short distance transfers that can be physically demanding on caregivers. It is designed to be used in communal spaces such as a hospital, skilled nursing centers or similar
Jenx Bee Chair
Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle
Jenx Monkey Prone Stander
Specifically designed to appeal to young children and their families, the Jenx Monkey is a fun and gentle introduction to standing. Offering smooth and easy angle adjustment, even with the child in the product, the Monkey can go from upright at 90 degrees, down to 20 degrees prone – providing a way to gradually build tolerance to standing as part of a therapy program. The capacity for outstanding thoracic and pelvic support coupled with flexible leg positioning make the Monkey prone stander an o
Jenx Supine Stander
Supine Stander is a robust standing support that offers children comfort and safety while standing. Children are supported at the back, leaving their hands free to access items on a tray or table in front of them.
Lady Shifting
---- PROTOTYPE --------- PURPOSE: To design a prototype of a transfer device to be used by caregivers in transferring a person from a wheelchair to a bed. The Lady Shifting is a transfer aid that allows caregivers to transfer the person for their chair to the bed and vice versa. TITLE: The Assisted Move. WEBSITE: Yanko Design. REF: http://www.yankodesign.com/2013/05/15/the-assisted-move.
Large Leg Lifter Pillow
The Large Leg Lifter Pillow is an orthopedic foam wedge pillow designed for those with lower back pain to provide comfortable knee positioning to gently ease stress on the lower back. This pillow helps to maintain proper pelvic positioning to help decrease low back pressure and pain. The Large Leg Lifter Pillow comfortably lifts the knees, which aids circulation and increases comfort after a back injury or surgery. This pillow can be positioned under the knees or behind the back for comfortable
Leg Lifter (Model Da-5150)
The Leg Lifter, model DA-5150, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This device has a wrist loop at one end and a larger loop for the foot at the other. It extends the user's reach to assist in lifting legs onto or off a wheelchair or bed. DIMENSIONS: 41 inches long. WEIGHT: 87 grams.
Leg Loop Leg Lift
The Leg Loop Leg Lift is a transfer aid designed for use by individuals with lower extremity or mobility disabilities. Constructed of nylon webbing, this device has a foot support that stays open until the Leg Lift strap is pulled. The foot loop support conforms to the shape of the foot for a secure, comfortable grip during transfer onto a wheelchair, footrest, bed, or into an automobile. DIMENSIONS: The leg lifter is 41 inches long and the webbing is one inch wide.
Leg Wrap Positioning Aid
The Leg Wrap Position Aid is designed for individuals with motor or sensory impairments such as hemiplegia, paraplegia, hemiparesis and paraparesis who have limited or no use of their leg(s). The Leg Wrap attaches to the user in three places to assist in repositioning the leg and transferring to/from a bed, chair, sofa, wheelchair, toilet seat, etc. Upper and lower handles allow for more controlled movement and reduce bruising and injury caused by grabbing and dropping the legs. Handles also el
Leglifter
The Leglifter is a leg lifter designed to aid people with lower extremity disabilities to lift their legs from a bedside sitting position onto a bed. The Leglifter has three components - an Airflo compressor, a remote control that connects to the compressor; and a large inflatable pillow that fastens on the right or left side of the bed frame underneath the mattress. The inflatable portion connects to the compressor with an air hose. The user sits on the side of the bed with his or her feet on o
Lifestyle Transfer Board (Models Rtl6044 & Rtl6045)
The Lifestyle Transfer Board, models RTL6044 and RTL6045, is a transfer board designed for use by individuals with balance, lower extremity or mobility disabilities or spinal cord injury. Intended for use in transfers to and from wheelchairs, this board features two horizontal cut-out handles for gripping and carrying. It has rounded corners with tapered ends. The board is made of Baltic birch with a clear lacquer finish. DIMENSIONS: Available in lengths of 24 and 30 inches. CAPACITY: 250 pounds
Liftvest
The LiftVest is a transfer aid designed for use with individuals with balance and mobility disabilities. This vest-style garment features an attached webbing harness that provides a dozen different hand holds for caregivers to use during assisted transfers. Designed to distribute pressure over the whole torso, this garment eliminates pressure points, and the harness features eight different adjustments to comfortably fit all male and female body types. Because the vest is designed to be an attra
Lightweight Half Step
This Lightweight Half Step is designed for persons with limited lower body mobility or anyone with walking disabilities. It is for those who find going up or down steps challenging. The Lightweight Half Step is designed to reduce the step height for older and for disabled people. It can be used indoors or outdoors. Made from durable recycled heavy duty plastic. Stable in sunlight and freezing conditions. Top of step has a cross hatch design providing a textured, nonslip service. Can be leveled b
Lightweight Plastic Transfer Board
The Lightweight Plastic Transfer Board is designed to aid individuals who use wheelchairs in transferring to and from the wheelchair. Molded of high-impact plastic with reinforcement ribs for maximum stength, this board provides a rigid transfer surface between any two level surfaces. DIMENSIONS (WxL): 8 x 30 inches. CAPACITY: 220 pounds.
Lite Transfer Board (Model Bk6466)
The Lite Transfer Board, model 6466, is a transfer board designed for use by individuals with mobility disabilities or spinal cord injury. Made of birch plywood with a lacquer finish, this board has tapered ends and rounded edges for easy sliding. DIMENSIONS (LxWxD): 24 x 8 x .05 inches. WEIGHT: 37 ounces.
Long-Leg Cast Lifter.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Strap attached to a long-leg cast to allow the patient to easily maneuver the cast. Strap made of 1 inch cotton webbing as long as the cast plus enough for a loop, fastened with small rivets, around the foot and another at the top to fit in the patient's hand. Four inch strips of a fastener such as Velcro are attached to the bottom of the foot and the top front of the cast with 5 inch strips of plaster; and to appropriate places on the loops of the str
Lovehandles (Models Lh-18, Lh-16, Lh-14 & Lh-20)
LoveHandles is a transfer aid designed for use with individuals with mobility, lower extremity, neurological, or severe physical disabilities or spinal cord injury. This device costists of a carbon frame with a seat and back support. Armrest-style tubular handles on each side and non-slip grips at each top corner of the backrest enable the individual in the device to be transferred by others to and from a pool, wheelchair, boat, automobile, airplane seat, up and down stairs, etc. The device come
Ministretcher (Model 4017)
The Ministretcher, model 4017, is a transfer aid designed for use in transfers of individuals with mobility disabilities in a lying position, mainly to and from an ambulance stretcher, a floor, or on stairs and in other cramped spaces. The unit has padding on each side of a flexible plastic board, which adapts to the shapes of ambulance stretchers, so the transfer aid can remain under patients for the entire journey. The plastic board also gives neck support under the head for safe lifting. DIME
Mjm Transfer Board (Model 600)
The MJM Transfer Board, model 600, is a transfer board designed for use by individuals with mobility disabilities, spinal cord injury, or severe physical disabilities. The board is made of high density polyethylene, and has eight carrying handles and three web nylon restraint straps with side release plastic buckles. DIMENSIONS (LxW): 71 x 23.5 inches. The restraint straps are 2 inches.
Mobi Changer
The Mobi Changer is a fully mobile changing table that requires no installation or fixing. Its compact and slimline design maneuveres from room to room making it a cost effective option for a multi-user environment. The Mobi Changer is available in a powder coated frame for dry rooms or stainless steel frame for wet-rooms. Additional features include: unique stowaway side rails, height range for easier handling, clearance for hoists and easy-to-clean padded surface.
Modrail
The ModRail is a bed transfer aid designed for use by individuals with balance or mobility disabilities. The unit includes a fixed dual rail and a horizontal bar (ModBar) that can be repositioned to an optimal support location. Lift to unlock, hold up to rotate freely, and lower any time to lock. The ModBar pivots and locks every 45 degrees and moves in step with the user. The ModRail assembly secures to ModRail Bracket via a securing knurled knob. ModRail is removable in seconds in case of emer
Molded Transfer Board (Model 6032)
The Molded Transfer Board, model 6032, is a high-impact, heavy duty plastic board with tapered ends designed to assist individuals with mobility disabilities with transfers. The board is 8.25 x 24.25 inches.
Movemaster Patient Mover
The MoverMaster Patient Mover is a transfer aid designed for use by individuals with mobility, lower extremity, or severe physical disabilities or spinal cord injury. This device is manufactured with silver ion antimicrobial built in for the life of the board. It features anti-pinch hand holes, anti-static inhibitors, and an ergonomic design. The unit is made from high-density stress-relieved polyethylene and is x- ray translucent. Model 2018 is a stretcher model and model 2022 is a hospital mod
Multichair 3000Tx
The MultiCHAIR 3000tx is a combined toilet chair, shower chair, and bathtub transfer bench designed for use by individuals with lower extremity or mobility disabilities. It has a nylon cloth back; an adjustable height raised toilet seat; a seamless padded self-skinning urethane seat cushion; two swing-away locking side arms; a swing-away transfer cushion kit; a drop rail on one side; suction cups for attaching legs to the bath or shower floor or for attaching the unit to the vertical face of the
Multimover
The Multimover is a transfer aid designed for use with individuals with mobility disabilities. The device is a nylon tibe which is placed under an individual aid in positioning in bed. The double-layer design enables the top layer to slide over the bottom layer, repositioning the individual. The unit folds for carrying and includes instructions. DIMENSIONS: 47 x 28 inches.
Norco Leg Lifter (Model Nc94301)
The Norco Leg Lifter Assist, model NC94301, is a leg lifter and leg positioning aid designed for use by people with physical disabilities. The device consists of an aluminum rod and foothold covered with webbing. A hand loop is located at one end and a larger foot loop at the other. The lifter is covered with 1-inch wide, soft nylon webbing. The 10-inch loop foothold is bendable. DIMENSIONS: The rod is 22 inches long. The total length including hand strap is 42.5 inches.
Offset Sliding Board (Model 6115)
The Offset Sliding Board, model 6115, is a lightweight birch transfer board designed to fit around the wheel of a wheelchair when the armrest is removed. A hand slot is cut into the board. DIMENSIONS (LxWxH): 28 x 11.75 x 3/8 inches. CAPACITY: 300 pounds.
Original Beasytrans Transfer Board
The Original Beasytrans Transfer Board is designed for use by individuals with mobility disabilities or spinal cord injury to use during transfers. The device provides users with a safe and comfortable way to transfer from bed to wheelchair, from wheelchair to commode or shower seat, to a car and back again. It features a circular seat gliding on a track that supports the user's weight as the transfer occurs. Since there is no lifting involved, the risk of back and brachial plexus type injuries
Original Lift Walker, The
The Original Lift Walker is a walker with lifter designed for use by children and adults with mobility disabilities. This device also functions as a mobile stander, a gait trainer, a transfer assist, and a toilet assist. The hydraulic lifter eliminates the need for manual lifting. The height-adjustable walker is constructed of powder-coated mild steel tubing and disassembles for transport. Standard features include a U-shaped base (available in narrow or standard) with four caster wheels, a choi
Outta Bed
Outta Bed is a bed mobility aid designed for use by adults and older children with mobility, neurological, balance, or severe physical disabilities, or spinal cord injury, arthritis, weakness, or pain in home and other homecare settings. This device can be positioned for right- or left-side use and mounts primarily to the bed frame of a standard home flat bed as well as to the floor and wall for added stability. This device can be used to assist in transfers to and from bed and to and from a wa
Padded Swivel Cushion
The Padded Swivel Cushion is a transfer aid designed for use by individuals with mobility disabilities. This cushion provides pressure relief for back and hips while seated. Made of foam, this portable disk rotates 360 degrees to assist with transfers from chairs and cars. The cover is removable making cleaning easier. DIMENSIONS: 15.5 inches in diameter x 2 inch high. CAPACITY: 225 pounds.
Parsons Slide Buddy (Model 14A089)
The Parsons Slide Buddy, model 14A089, is a dual-purpose transfer aid designed for use in positioning and transferring individuals with mobility disabilities. The waterproof nylon slide side has a non-slip base that aids a caregiver in positioning the person when entering or exiting an automobile. The reverse side features slippery nylon and six hand holds to aid in transferring from a bed or sofa. DIMENSIONS: (LxW): 30 x 35 inches.
Patient Pivot Transfer Disk (Model H70407)
The Patient Pivot Transfer Disk, model H70407, is a standing transfer aid designed for exchanges between one chair and another, or a wheelchair and a bed. The device consists of a rotating platform with ribbed rubber top and bottom faces. The top surface rotates while the bottom remains stationary, and internal friction pads control the rate of turning. DIMENSIONS: Disk is 0.5 inches high, and is available in diameters of 12 inches (H70407-0002) or 15 inches (H70407-0003). WEIGHT: Under 3 pounds
Patient Transfer Belt
The Patient Transfer Belt is a gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable belt consists of double-stitched nylon and Sherpa lined for added comfort. Other features include a plastic side release buckle and four grip point handles for security and to aid the care giver in using his/her legs and body weight during transfers. SIZES: Small/medium (fits waists 24 to 42 inches) or large (fits waists 33 to 5
Plastic Shower Transfer Bench
The Plastic Shower Transfer Bench is a 1-inch sturdy aluminum frame chair that is corrosion resistant. The bench is designed for individuals with neurological and lower extremity disabilities to use while bathing. The back reverses without tools to accommodate any bathroom. There are extra-large suction cups that provide added safety. Tool-free assembly.
Plastic Transfer Board
The Plastic Transfer Board is a general transfer device designed for those individuals with mobility disabilities to make transferring an individual to and from a wheelchair easier. Lightweight plastic board for use in home care and clinical settings.
Portable Overhead Bar
DO IT YOURSELF ENTRY --- PURPOSE: To provide a portable, lightweight device enabling a person with limited upper body strength to change position in bed. The device was built from the strong but lightweight expandable tubing used in clothes closets. Quick release pins allow a vertical range from 3 to 4 feet and width range from 3 to 5 feet. The foldable legs are made of Lexan plastic. A canvas strap is pulled tight across the underside of the bed to make the whole unit stable. For travel, every
Posey Transfer Belt (Models 6537, 6537Dx, 6537Q & 6537Qdx)
The Posey Transfer Belt, models 6537, 6537DX, 6537Q and 6537QDX, is a transfer aid designed for use with individuals with balance, lower extremity, mobility or walking disabilities. This machine washable, extra-wide soft nylon belt features sewn-on handles that provide multiple vertical and horizontal grasping points. The Standard version of this belt (model 6537) has six grips and fits waist sizes 28-52 inches; and the Deluxe version (6537DX) has seven grips and fits waist sizes 30-66 inches. B
Positioning Slide
The Positioning Slide is a tranfer aid designed to enable a single caregiver to independently move an individual from one side of a bed to the other. This lightweight, smooth, flexible slide is stain resistant and cleans with disinfectant. This latex-free slide features a self-adhesive hook for hanging. DIMENSIONS (LxW): 33 x 22 inches. WEIGHT: 7.8 ounces.
Pressure Relief Turning Cushion (Model Ha-4782)
The Pressure Relief Turing Cushion, model HA-4782, is a foam ring seat cushion and turning aid designed for use by individuals who are at risk for developing pressure sores. This doughnut-shaped foam cushion fits the hips to reduce pressure when sitting. It distributes weight evenly and helps the user to maintain the correct posture. It also provides 360 degrees of rotation for turning. A washable cover and non-slip sheet are included. DIMENSIONS: The overall diameter is 400 millimeters and the
Push-Up Frame
The Push-up frame is a transfer aid designed to assist individuals with mobility disabilities in rising from or lowering to a seated position. This metal frame slides under the user and has angled handles with foam padding to assist the user. The frame is collapsible for travel and storage. DIMENSIONS (DxWxH): 11 x 22.5 x 8 inches. WEIGHT: 3 pounds.
Quick-Release Gait Belt (Models 6524Q, 6528Q, & 6531Q)
The Quick-Release Gait Belt is designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This machine-washable cotton belt is available in standard and extra-long styles and features a quick-release buckle. DIMENSIONS: The standard belt fits 24- to 52-inch waists and the extra-long belt fits 53- to 70-inch waists. COLOR: Model 6524Q is white, model 6528Q is navy, and model 6531Q is pastel bouquet (stripe).
Racing Wheelchair Stabilizer
DO IT YOURSELF ENTRY --- PURPOSE: To facilitate transferring a child to a racing wheelchair. The unit has a plywood base with a pipe frame at the front to hold the front wheel; the front wheel is further secured with a Velcro strap. This stabilizes the racing wheelchair for ease of transfers in and out with one person assisting. The half-inch thick plywood base is made to the size of the wheelchair, and excess material is removed to create a lighter weight base. The pipe frame consists of one-in
Resqup Floor Recovery Mobility Aid
The ResQUp ™ is an up-from-the-floor mobility device developed and designed for the specific purpose of aiding patients, healthcare providers, and a wide variety of caregivers in clinical, assistive care, and in-home settings. The ResQUp ™ is particularly useful in situations where an individual does not have the volitional strength or abilities to get up from the floor independently. The ResQUp ™ utilizes an incremental, ergonomically, and physiologically integrated system comprised of 4½ inch
Return 7500
ReTurn 7500 is a manual transfer aid designed for use by individuals with mobility disabilities. This unit can be used to transfer individuals to or from beds, wheelchairs, or toilets. It rolls easily and can support a heavy user. OPTIONS: ReTurn Belt support belt.
Reversible Slant Bed Rail
The Reversible Slant Bed Rail is two bed rails in one, designed for users with unique mobility needs. The user chooses which direction to place the bed handle. These bed handles provide a wide range of grasping and leveraging positions to help promote better bed mobility and avoid back strain. Two support tubes are placed under the mattress to prevent the bed handle from slipping. Position support tubes and snap Slant Rail into place.
Reversible Toilet Transfer Seat
The Reversible Toilet Transfer Seat is a bathroom safety product designed for individuals with limited mobility disabilities to assist them with getting on and off the toilet. Those individuals do not need an elevation seat or grab bars. Dual use toilet seat. Includes installation bolts. Gripping slots aid in muscle contractions. Dual use toilet seat Includes installation bolts. Gripping slots aid in muscle contractions.
Rifton Dynamic Stander
The Rifton Dynamic Stander is a mobile prone stander that provides independence and standing mobility for individuals who use wheelchairs. Additionally, the mobile stander helps strengthen one's motor skills so a user can progress toward independent standing.
Rifton Hygiene Support Station
The Rifton Hygiene Support Station is assistive technology designed for people with severe physical disabilities to allow partially weight-bearing individuals to undergo hygiene care or a diaper change in an upright position, making the process more dignified, improving access to clothing and skin and eliminating heavy lifting on the part of the caregiver. Ships in 2 weeks.
Rifton Pacer Gait Trainers
Designed for a wide range of individuals with varying abilities, the Rifton Pacer gait trainers are created to be durable and flexible.
Rigid Leg Lifter (Models Aa8621 & Aa8623)
The Rigid Leg Lifter, models AA8621 and AA8623, are designed to enable individulas with spinal cord injury and lower extremity disabilities to reposition their legs. Made of reinforced webbing around a rigid yet adjustable metal rod in the center and foot sections, the devices have wrist loops and a foot loops. The wrist loop is flexible webbing for comfort and the foot loop can be bent to accommodate a foot or a cast. DIMENSIONS: Model AA8621 is 41 inches long and model AA8623 is 34.5 inches lo
Roll Aid Transfer Device.
Light weight transfer board to assist in moving person from one level surface to another, can be used for up to 3 inch uneven heights. Four aluminum rollers on frame with steel ball bearings, vinyl roller cover. Attendant can slide person over rollers to complete transfer without lifting the person.
Safe-T-Pole (Model 98120)
Floor to ceiling pole of heavy gauge steel, 1 1/2 inches in diameter. White. Mounts anywhere, no tools required for installation. Assist standing, sitting, climbing stairs or transferring. Adjustable height 7 feet 8 1/4 inches to 8 feet, 2 1/2 inches. Weight 14 pounds.
Safety Sure Pivot Transfer Disc
The Safety Sure Pivot Transfer Disc is designed for independent use by people who can move their upper extremities or for use by patients who are able to stand but cannot readily move their legs to assist them in transferring from a chair or wheelchair to a bed or toilet. An individual with impaired mobility from paralysis or limited upper body functions can use the Safety Sure Transfer Pivot Disc unassisted. A transfer belt or sling can be used in conjunction with the Safety Sure Transfer Pivot
SafetySure Mary's Aide Transfer Sling
SafetySure® Mary's Aide Transfer Sling provides caregivers with a secure hold and control during patient transfers. Made of woven nylon with hook-and-loop closures and shaped like an undergarment, it is worn over the patient's clothing. During transfer, the transfer sling stays securely in place without binding or riding up. A hand grip on the back of the transfer sling can be used during ambulation as an alternative to a gait belt. Machine wash and dry or wipe clean.
Safetysure Transfer Belt
The SafetySure Transfer Belt is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. This belt has numerous hand grips to assist in transfers and gait training. It can also provide equestrian sidewalkers with a variety of leverage points. The anti-slip interior prevents the belt from moving. The easy-to-fasten "fix lock" buckle allows the belt to be tightened without having to open it. SIZES: Small (fits waists 23 to 36 inch
Safetysure Transfer Belt With Sherpa Lining
The SafetySure Transfer Belt with Sherpa Lining is a manual transfer aid, gait belt, or walker belt for people with balance, lower extremity, mobility or walking disabilities. Numerous hand grips provide a variety of leverage points to aid caregivers with transfers, therapists with gait training, or sidewalkers in therapeutic riding programs. The soft synthetic sheepskin lining provides extra comfort and protection for individuals with sensitive skin. An easy-to-fasten "fix lock" buckle allows t
Safetysure Transfer Sling
The SafetySure Transfer Sling is a manual transfer sling designed for use by individuals with mobility and balance disabilities. This device consists of a padded sling with dual webbing handles on each side. The sling is wrapped around the person to be transferred and the handles provide the caregiver with optimum working position to transfer the individual from a bed to a chair or wheelchair, from wheelchair to a toilet, etc. The device can also be used to aid in positioning an individual withi
SafetySure® CarEase
The SafetySure® CarEase is an assistive product designed for the elderly or persons with limited mobility to aid them in slipping into the seat of a car.
Sammons Preston Hardwood Transfer Board (Models 6113 & 6114)
The Maple Transfer Board models 6113 and 6114 are transfer boards designed for use by people with mobility disabilities. The boards features a highly lacquered finish and tapered ends. DIMENSIONS (DxLxW): Model 6113 is .75 x 24 x 8 inches and model 6114 is .75 x 30 x 8 inches. Both models taper to 1/8 inch at the ends. COLOR: Natural maple.
Sammons Preston Soft Flexible Leg Lifter (Model Aa8619)
The Sammons Preston Soft Flexible Leg Lifter, model AA8619, is designed to enable individulas with spinal cord injury and lower extremity disabilities to reposition their legs. Made of soft webbing with a semi-rigid center, the device has a wrist loop and a foot loop. DIMENSIONS: 34 inches long.
Sammons Preston Transfer Disc
The Sammons Preston Transfer Disc is a transfer aid designed for use by individuals with mobility disabilities. Designed to assist standing transfers, this portable device comprises a turntable on a base that rotates during transfers. Both the base and the turntable are covered with a non-slip, grooved material for safety. DIMENSIONS: 14 and 15 inches in diameter. CAPACITY: 300 pounds.
Sara Stedy
The Sara Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Sara Stedy to transfer the user, the caregiver then flips down the seat, and th
Sciatic Nerve Pain Relief Knee Pillow
The Sciatic Nerve Pain Relief Knee Pillow is an orthopedic foam wedge pillow designed for users with lower back pain, arthritis, headaches/migraines, post-knee replacement surgery, injuries, bursitis, sciatica, or postural problems. It is designed to ease back, leg, knee, ankle and hip joint pain by providing proper spinal alignment and reducing pressure while sleeping. The user inserts the bolster between your knees and sleep on the side most comfortable. The pillow is designed to improve circu
Security Pole
The Security Pole is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are required. The Secu
Security Pole & Curve Grab Bar
The Security Pole and Curve Grab Bar is a vertical pole transfer aid designed for use by individuals with balance, mobility, or lower extremity disabilities. This pole can be installed in any room and placed beside a chair, bed, couch, toilet, shower, or tub to assist with standing and sitting and transfers. It can also be moved between rooms if needed. Made of rust-resistant, zinc-plated steel, this floor-to-ceiling pole is tension mounted and is packaged with its own wrench; no other tools are
Shower Aide Chair
The Shower Aide is a transfer aid designed for use by individuals with balance disabilities when bathing to provide protection from falls and resulting injuries. The chair allows the bather to sit on the seat outside of the tub or shower, fold down the arms and swivel the chair to slide into the tub or shower and lock the seat in position. When the shower is completed, the user lifts the locking lever, swivels the chair back to the outside of the tub/shower, where the unit again locks into posit
Sit-to-Stand Padded Sling Nylon
The Sit-to-Stand Padded Sling Nylon is a transfer sling designed for use by individuals with mobility and balance disabilities. The sling is intended to comfortably and securely support an individual during lift and transfer procedures with a floor-style patient lift. The sling is made from durable material, which resists deterioration from exposure to moisture and laundering.
Sliding Board (Models H70405-0000 & F70405-0001)
The Sliding Board is a transfer aid for use between a wheelchair and a bed, commode, toilet, chair, etc. The board is available in two models: hardwood and plastic. The hardwood board (model H70405) is made of 1/2-inch thick nominal hardwood with end cutouts to facilitate gripping. The plastic board (model F70405-0001) is molded of high-impact plastic with ribs for maximum beam strength. DIMENSIONS: Hardwood model is 8 x 30 inches; plastic model is 8 x 27 inches. WEIGHT: Hardwood board weighs le
Sliding Board Modification.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Strap is added to a wood transfer board to aid in lifting and positioning it. Using a standard wood transfer board with beveled ends, drill, sand and varnish two slots 1/1/2 by 1/2 inch. The slots are 16 inches and 12 inches from one end of the board and 12 inches and 8 inches from the other end of the board. Loop 16 inches of 1 inch wide Dacron web strap through the slots and sew end to end to form a loop. Loop should be large enough to put hand throu
Sliding Board.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Used to bridge space between two surfaces so the person can move or be moved from one surface to the other by sliding in a seated position. Directions and diagram for making a beveled wooden sliding board. similar to commercially available transfer board. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 46. 1976.
Smart-Rail
The Smart-Rail is a transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel rail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. The unit locks in place at the bedside and lifting it to unlock it allows it to swing out to assist in standing. Models are available for standard and hospital beds. OPTIONS: Leg extenders. DIMEN
Smithcot
The Smithcot is a flexible canvas sling that can be used for moving persons with mobility, walking or lower extremity disabilities or seniors, or as an emergency evacuation carrier. The Smithcot is designed to hold an individual comfortably but securely around tight corners or down stairways. It is made of a single square of #8 100% cotton duck cloth, and it has four grip handles, one a at each corner. The Smithcot is not for use with people who have suspected back or neck injuries. DIMENSIONS (
Soft Surface Transfer Board (Models Tb-23Sst & Tb-28Sst)
The Soft Surface Transfer Board is a transfer board designed for use by individuals who use wheelchairs. This board is designed to assist with transfers from a wheelchair to a softer surface such as a bed or lift chair. The pear shape of this board minimizes sinking into a soft surface when transferring, creating a more level transfer. The wide end of the board distributes the users weight over a broader area relulting in a transfer with little or no incline or decline. OPTIONS: Available with o
Soft Transfer Belt (Models 527S & 527)
The Soft Transfer Belt, models 527S and 527, is a standing transfer aid designed for use by caregivers when aiding transfers by individuals with balance, mobility, lower extremity, or walking disabilities. The soft, fully padded belt is slip resistant. It closes with a buckle at the front and the fastening can be adjusted for size. The belt is recommended for use with women who have a large bust or people whose body shape requires a narrower belt fastening. The belt has four large padded vertica
Southpaw Xl Adult Changing Tables
The Southpaw XL Changing Tables are designed for use by caregivers, therapists or family members who experience the back strain and pain that accompanies lifting and transferring clients. The table is powered by an electric motor that lowers the frame 18 inches from the floor (sloping the feet towards the ground), enabling the client to self transfer or use minimal assistance. The safety rails are then locked in the upright position and the frame is then raised to a maximum 37 inches high. This
Stander Curve Grab Bar
The Curve Grab Bar is a wall grab bar designed for use by individuals with balance, mobility, or lower extremity disabilities or arthritis. This grab bar is made of rust-resistant zinc-plated steel. It has two major components, a vertical, curving ladder-like shape that provides four gripping heights and pivots 180 degrees, and a horizontal grab bar that extends from the bottom of the curved part. The swiveling bar locks in place at 0, 90, and 180 degrees. DIMENSIONS: The total height when insta
Standers Car Swivel Cushion
The Standers Car Swivel Cushion is designed to benefit the elderly and persons with a mild to severe disability or condition which prevents that individual from getting in and/or out of the car safely. This product is intended to reduce pain on the back, hips and knees when exiting and entering a vehicle. Rotates 360 degrees. No tools, batteries or assembly required. Soft, quilted padding. Portable. Due to the hygiene or rehabilitation nature of this product, it is non-returnable.
Stedy
The Stedy is a transfer aid or standing designed for use by individuals with balance, lower extremity, mobility or walking disabilities or spinal cord injury. This mechanical device is used to move a person short distances, such as to and from the toilet, or to assist a person to stand. From a sitting position, the user can grasp the crossbar at the top of the frame and pull up to a standing position. To use the Stedy to transfer the user, the caregiver then flips down the seat, and the user sit
Stretch Out Strap
The Stretch Out Strap is an exercise band designed for use by individuals with arthritis, mobility disaabilities, neurological disabilities, and other physical disabilities. This exercise strap is double stitched in a series of loops for the hands and feet to enable the user to stretch independently and progressively. The device can also serve as a rope ladder or a leg lifter. The Strap is available alone or with an exercise videotape demonstrating 28 stretches for different areas of the body.
Sunnyfield Lift
Sling lifting aid. Sling seat is placed under person in sitting position with safety straps around chest. Requires two attendants to lift. Attendants grasp web handles on each side of shoulders and thighs to transfer person. Polyester fabric. Can be used in most lying and sitting situations. Standard dimensions unfolded 17 inches by 39 inches. Options: commode style seat, washable incontinent pad, and sitting wedge. Sizes: S,M, L, custom sizes available.
Super Grip Suction Handle
The Super Grip Suction Handle is a bathroom bar designed to help users get in or out of the shower or tub. The bathtub bars are made of steel, are white, and enamel-coated. The crank-looking device attaches to the tub wall in order to help persons with mobility issues get in/out of the bathtub. This product has rubber pads to prevent damage to the tub walls.
Superpole & Superpole Bariatric
The SuperPole Transfer System is a transfer aid designed to assist individuals with mobility disabilities. Available in standardand bariatric models, this modular system may be used beside the bath, toilet, bed, or chair and offers sturdy support. Made of rigid heavy-gauge steel, the pole features a slip-resistant rubberized foam grip, a low-profile base, and a rubber friction pad on the top and floor anchor plate to prevent twisting during use. The system is available with the pole only, with a
Superpole F.r.s.
SuperPole F.R.S. is a vertical pole transfer aid designed for use by individuals with balance, mobility, or walking disabilities. The unit is a portable steel pole that provides standing and transferring support in institutional (concrete floor) applications. This is a compact alternative to the SuperPole (see entry) floor to ceiling pole system that eliminates the need for ceiling attachment. The SuperPole FRS is placed into the installed floor receptacle and secured into the receptacle by turn
Superpole Traveler
The SuperPole Traveler is a portable transfer aid designed for use by individuals with balance, walking, or mobility disabilities. Central to the system is a floor-to-ceiling vertical steel grab bar, which provides a secure structure that can be installed in minutes between a floor and ceiling. The unit installs by turning the jackscrew at the bottom of the pole. The screw expands the pole to create enough tension between the floor and ceiling to hold the pole secure. Rubber pads on the ceiling
Supertrapeze
The SuperTrapeze is a support bar designed for use with Healthcraft's SuperPole. The add-on allows a user to pull themselves in an upright position out of bed or off a couch. The two offset ladder rungs help to improve arm strength and increase back comfort. The device can be stowed when not in use.
Swivel Cushion
The Swivel Cushion is a car transfer aid designed for use by individuals with arthritis or mobility disabilities. The two-piece, low-profile cushion has a soft top that rotates smoothly on a flat center disk. The nonskid bottom conforms to the shape of the seat and keeps the unit in place. DIMENSIONS: 16 inches in diameter. CAPACITY: 350 pounds.
Swivel Cushion (Model Ha-4781)
The Swivel Cushion, model HA-4781, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This cushion helps the user to turn when getting in or out of a car, wheelchair, or bed. It has a washable soft fleece top cover. DIMENSIONS: 405 millimeters in diameter x 55 millimeters high. WEIGHT: 1.5 kilograms.
Swivel Seat
The Swivel Seat is a transfer aid designed for use by individuals with mobility and lower extremity disabilities. This cushioned disc secures to automobile seats and chairs with the attached strap. DIMENSIONS: 15.5 inches in diameter and 2.75 inches high.
The HealthCraft Dependa-Bar
The HealthCraft Dependa-Bar™ is a safety bar designed for individuals with mobility disabilities to prevent slipping when transferring in and out of the shower and bathtub. For commercial and residential use.
Theraslide Transfer Boards
Theraslide Transfer Boards are designed to assist people who use wheelchairs. The 20 models of these boards are constructed from defect-free birch plywood and machined from 7-ply base board with 3 additional plies form-laminated over this surface from end to end, producing a smooth, uninterrupted surface. All edges are computer routed and the surface is machine- and hand-sanded and finished with multiple coats of semi-gloss lacquer/sealer. Models include the plain board, board with telescope and
Tidis-B: Wheelchair-To-Bed Transfer System
Tidis-B (Transport of Individuals with Disabilities into Bed) is an assistive device designed to move a person from a wheelchair to a conventional bed, as well as from a conventional bed to a wheelchair. The device is intended for use in homes and is able to transport a person who weights up to 300 lbs. In addition, the device requires minimal physical assistance by caretakers, which can help prevent back injuries. The device is designed so that the person being transported is comfortable and sa
Tlc Turn-And-Lift Pad (Model 557001)
The TLC Turn-and-Lift Pad is a transfer aid designed to assist caregivers in turning and positioning individuals with physical disabilities in bed. This pad has a brushed tricot top layer, a middle layer of absorbent foam, and a bottom layer of urine-proof vinyl. Attached loops aid in turning and positioning. DIMENSIONS: 40 x 40 inches
Toilet Access Platform And Rail
CUSTOM ADAPTATION PURPOSE: To provide a custom adaptation of a toilet access platform and rail for a child with Multicystic Leukoencephalopathy and poor motor skills. The frame was made from round steel tube painted white, the frame goes right over the toilet to support a plywood backrest and side rails which the child uses both to access the toilet and keep his balance on the seat. There is also a wide plywood platform in front of the toilet with non-slip strips attached. All the timber is fin
Toilet Bench.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Over the toilet bench the height of a wheelchair seat with an opening in one side to allow a person to slide from the wheelchair and use the toilet. Wooden bench about 3 feet long and as high as a wheelchair seat, with an opening at one end to be positioned above the toilet. Includes photograph. COMMENTS: Submitted by the Institute of Physical Medicine and Rehabilitation, Bellevue Medical Center, New York University. SKILLS REQUIRED: Woodworking. TITLE
Toilet Transfer Aid
DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a means for those with weak muscles a means of independently getting on and off the toilet. Two one-inch eyehooks are attached to the bathroom ceiling about 16 inches apart and 8 inches in front of the toilet. A length of quarter-inch nylon rope is braided through the hooks, then threaded through 5/16-inch holes in two 1.75-inch wooden dowels, each 18 inches long. The top dowel is placed at the user’s shoulder level and the lower one 8 inches below. B
Topsheet (Models 1519 & 1520)
TopSheet, models 1519 and 1520, is a bed turning aid, incontinent pad, and decubitis pad designed for use by individuals with mobility disabilities or incontinence. The top side (model 1520) is made of super-absorbent material, and the underside (model 1519) consists of a polyurethane-coated moisture-repellant membrane. The surface that the patient lies on is soft, brushed polyester. The surface always feels dry to lie on, which helps prevent pressure sores. Strong straps for fastening to a ceil
Trans-Sit Toilet Transfer Board
The Trans-sit Toilet Transfer Board is a toilet transfer board designed for use by individuals wh use wheelchairs. This transfer aid is designed to attach to the toilet and bridge to the wheelchair to offer a safe method of transfering on and off the toilet. Made of high- density polyethylene plastic for ease of cleaning, the Trans-sit board secures to the rim of the toilet with rim stops (one on the inside of the toilet and one on the outside of the toilet). This feature prevents the shifting
Transborder
The Transborder is a standing transfer aid designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. The device is a rotating pole that can be used to transfer from one seated position to another (eg., from one wheelchair to another). The user first turns and locks the direction handle, then puts his/her knees and feet in place, grasps the direction handle and stands slighty using arm strength, and then rotates to the selected point. OPT
Transfer Belt
The Transfer Belt is a gait belt designed for use with individuals with mobility disabilities. This belt enables a therapist or caregiver to provide light to moderate assistance during walking, sitting, or transferring. This belt features hook-and-loop closure and two webbing handholds. DIMENSIONS: Models are available to fit 28 to 42 inch waists, 32 to 48 inch waists, and 36 to 54 inch waists.
Transfer Belt (Model Ha-4710)
The Transfer Belt, model HA-4710, is a transfer aid designed for use by individuals with mobility disabilities or spinal cord injury. It is designed to help an assistant lift the user from a bed, chair, or wheelchair, or support the user in short-distance transfers. The belt has four webbed handle grips for safety when transferring. DIMENSIONS (LxW): The belt is 740 x 140 millimeters. Its strap is 740 millimeters long. WEIGHT: 205 grams.
Transfer Belt (Models 655701 & 655702)
The Transfer Belt is a transfer aid designed to assist therapists and caregivers in transferring individuals with mobility disabilities from a chair to a bed or from a bed to a chair. The belt also provides leverage during assisted walking and standing. The belt is made of heavy-duty cotton webbing and a secure metal buckle to close it around the waist. DIMENSIONS (LxW): Model 655701 is 54 x 2 inches long and model 655702 is 72 x 2 inches long.
Transfer Board (Model 765)
The Transfer Board, model 765, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It has gradually tapered ends and is constructed of hardwood and has a smooth, natural finish. DIMENSIONS (WxLxT): 8 x 30 x 0.75 inches.
Transfer Board (Model 765H)
The Transfer Board, model 765H, is designed to aid a person with lower extremity or mobility disabilities or spinal cord injury to transfer from a wheelchair or chair to a commode or bed and back. It features hand slots with tapered ends, and it is constructed of 14 ply hardwood with a smooth, natural finish. DIMENSIONS (WxLxD): 8 x 30 x 0.75 inches; hand slots 19 inches apart.
Transfer Boards
Transfer board made of solid red oak electronically glued for strength and crack resistance. Finished boards are coated with urethane sealer and polished. Unfinished boards are sanded smooth and are ready to finish. Boards are 8 inches wide, available without hand hole, with one hand hole or with 2 hand holes, and in 24 or 30 inch lengths.
Transfer Commode Seat.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Adapted transfer seat on a commercially available commode chair with swing away arms. Allows person to transfer more easily between a wheelchair or bed and the commode chair. The standard seat is removed from a commode chair and a wooden seat is made from 3/4 inch plywood. One side of the seat is extended like a transfer board with a slot near the far end to hook onto the wheelchair frame. Includes pictures. SKILLS REQUIRED: Woodworking. AUTHOR: Eileen
Transfer Disc
The Transfer Disc is a standing transfer aid designed to assist caregivers in transfering individuals. The disc rotates on a graphite pad. The thin profile allows a transfer with minimal movement. DIMENSIONS: The disc has a diameter of 15 inches.
Transfer Handle, The (Models 2001, 2025, & 2025H)
The Transfer Handles are transfer aid designed to assist people with mobility disabilities in transferring to and from a bed and to assist with in-bed mobility. Model 2025 features a steel handle attached to a bed board which slides between the mattress and the box springs. Shaped in an inverted U, the handle also has a second, lower bar for added stability in standing and greater in-bed mobility. Model 2025H is similar to model 2025, but is designed specifically for use with hospital-style beds
Transfer Sling
The Transfer Sling is a transfer aid designed to enable a caregiver or therapist to safely assist individuals with mobility disabilities in transferring and standing. This device combines a transfer belt with a sling, providing support around the back and behind the knees. Handles enable the caregiver to lift without strain. SIZES: Small/medium or large. CAPACITY: 250 pounds.
Transfer Sling And Gait Belt
The Transfer Sling and Gait Belt is a combination manual transfer sling and gait belt designed to provide a secure grasp for therapists and caregivers during ambulation training and transfers. This belt-style device provides support under the knees and behind the back, aiding in better body mechanics during one- and two-person assisted transfers. SIZES: Small/medium or medium/large. CAPACITY: 250 pounds.
Transfer Trapeze
The Transfer Trapeze is a powered transfer aid designed to allow the user to transfer from a wheelchair to a couch with the aid of an overhead trapeze. The motorized trapeze is suspended from a wheelchair-mounted frame. The frame consists of steel tubing and 1-inch electrical conduit tubing. The motor consists of a used car window motor, which is mounted underneath the seat of the wheelchair. The user grasps the trapeze and activates the mounted switch, which rotates the device 90 degrees and tr
Transfer Turntable (Model Ha-4770)
The Transfer Turntable, model HA-4770, is a turning and transfer aid designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This strong, lightweight turntable rotates 360 degrees in any direction, enabling a helper to transfer the user safely from chair to bed or car to wheelchair. DIMENSIONS: 405 millimeters in diameter. CAPACITY: 125 kilograms. WEIGHT: 1 kilogram.
Tubbuddy With Tilt (Model Sb2T)
The TubBuddy with Tilt, model SB2T, is a caster shower commode designed for use by individuals with lower extremity, mobility or severe physical disabilities or spinal cord injury. This system allows a caregiver to transfer an individual over the edge of a bathtub for ease in showering or to be rolled over a standard or elongated toilet when used as a commode. For transfer into or out of a shower enclosure, see the ShowerBuddy (see separate entry). The chair can also be used a shower chair for r
Turning Cushion (Model Ha-4780)
The Turning Cushion, model HA-4780, is a transfer aid designed for use by individuals with lower extremity or mobility disabilities or arthritis. This foam-padded cushion swivels 360 degrees in any direction to help the user in rising from a seated position. The cushion can be used in a vehicle or on a chair. Its removable cover is water washable. DIMENSIONS: 390 millimeters in diameter. WEIGHT: 1 kilogram. COLOR: Gray.
Turnsheet (Model 1580)
The Turnsheet, model 1580, is a transfer aid designed to assist individuals with mobility disabilities in turning or changing positions in bed. The Turnsheet consists of two elements: the first element is quilted mat with a woven cotton top layer, a layer of flame-retardant trevira padding, and a bottom layer of ultra-low friction woven nylon. This element is equipped with webbing straps to be attached to the head of the bed frame. The second element is a mattress cover with an ultra-low frictio
Turntable (Model 5085)
The TurnTable, model 5085, is a standing transfer aid designed for use by individuals with mobility disabilities. It is used to enable transfers to and from wheelchairs, beds, and toilets by individuals who have enough strength to stand on their legs but not enough energy to move their feet. It is made of durable polyethylene with a rubber-like anti-slip surface. Two discs are attached in the center with a metal screw, enabling the top disc to rotate and pivot the user to the proper position for
Ultraslick Transfer Board
Transfer board to aid in transferring from wheelchair to bed or chair or toilet. Fiberglass laminated with hardwood. Lengths: 18, 24, or 30 inches. Available with or without hand holes on each end.
Uneek Bedrail System
The Uneek Bedrail System is a side rail and transfer aid designed to assist individuals with mobility and balance disabilities in entering and exiting the bed. The steel bedrail attaches to a steel frame that slips between the mattress and the box springs. Safety straps provide additional support in anchoring the unit to the bed. This portable bedrail system is available in two models. One opens and closes like a gate, and the other one does not. Both models feature a utility board that can supp
Webbed Transfer Aid
"DO IT YOURSELF" ENTRY --- PURPOSE: To enable individuals to be lifted and transferred from one seat or surface to another in a seated position. To make this device, cut one 72-inch strip of webbing (lengthening may be required for use with a larger person) and then cut eight eight- to nine-inch strips (lengthening may be required for use with a larger person). Assemble straps in a crosshatch pattern. Zig Zag stitch along end of all the straps to avoid fraying. Straight stitch all seams about on
Wheelchair Training Stools (Model 710)
The Wheelchair Training Stools, model 710, are transfer training devices designed for teaching patients to get in and out of wheelchairs without assistance. As the patient becomes more skilled, the steps may gradually be removed. The steps can be hooked together securely in any sequence. DIMENSIONS: Top size is 20 x 10.75 inches, height of stools are 20, 16, 12, 8 and 4 inches. CAPACITY: 250 pounds.
Wheelhold Board (Model 31569)
The Wheelhold Board, Model 31569, is a transfer board designed for use by people who use wheelchairs. This lacquered, 7-ply Finnish birch plywood board is designed to fit around the wheel of a wheelchair when the armrest is removed and is equipped with a tongue that fits between the seat and the wheel to secure the board during transfers. The board has a wide surface to assist with balance. DIMENSIONS (LxW): 28 x 11.75 inches. COLOR: Walnut stain. WARRANTY: The manufacturer warrants this product
X-Fer Rail Portable Transfer Rail
The X-Fer Rail Portable Transfer Rail is a transfer board for designed for caregivers to use with individuals with mobility difficulties. Enables safe transfers to and from a wheelchair. Quickly folds and unfolds. Conveniently fits in a backpack, wheelchair bag, carry-on or briefcase (not included). Portability of the board promotes use outside of the home which will help to reduce shoulder strain associated with independent transfers. Open seating design reduces the risk of friction based skin